Can admin pls advice more details on this update?

Is this Android 7? Great that there is an update! Would like to receive more info before I'll flash this one.

hello,

i've tried it, and it's android 7.

what i translate out of the changelog is:
1. add face-unlock (found it, but not work, may because of bad light)
2. weird translation, something fixed with the screen (about blinking? really weird translation)

i just unchecked userdata and had nothing to restore - seems to work proper in the first 20 minutes

PS: blackview, please update the security-patches too!!

I'm still in Android 6, but Bluetooth not working properly~ was thinking to flash to this. Need more info before proceeding~ thx all

hersche wrote:

hello,

i've tried it, and it's android 7.

what i translate out of the changelog is:
1. add face-unlock (found it, but not work, may because of bad light)
2. weird translation, something fixed with the screen (about blinking? really weird translation)

i just unchecked userdata and had nothing to restore - seems to work proper in the first 20 minutes

PS: blackview, please update the security-patches too!!

I just updated my BV6000 via local update but it shows up as 20170708. What does yours say?

... not enough informations about this update from Blackview ... as usual !!!

mobosenshi wrote:

I just updated my BV6000 via local update but it shows up as 20170708. What does yours say?

I think that you need to flash this one using a PC. The procedure is in the sticky post in this forum section.

hersche wrote:

hello,

i've tried it, and it's android 7.

what i translate out of the changelog is:
1. add face-unlock (found it, but not work, may because of bad light)
2. weird translation, something fixed with the screen (about blinking? really weird translation)

i just unchecked userdata and had nothing to restore - seems to work proper in the first 20 minutes

PS: blackview, please update the security-patches too!!

How is the battery performance? since many comment about previous 7.0 battery issue~

Oh, i have to say: i did not do a local update, i do it via SP-Flash-Tools. I don't know if it works via local update.

My build-number contains still v01_20170412

my kernel build is from 2018 now

when i go to system-update, there's something like v01_20170412_20180104-1351

with the build-number, it is a bit confusing (because it's old), but it still applies

Batteryperformance looks ok to me. About 25% in the night before, 20% after wakeup.. not better or worse for me, but i not reconized a issue there till now anyway

edit: i don't know if it's by hardware or software/upgrade, but today i had a batterycrash with reloading over hours. also, the preloader (batterysymbol when phone is "off") does not come to battery-percentage - right now i was able the first time to start the system again. the battery was at 3 percent. when the phone was off, only the battery with circle was shown and screen stays enabled (what costs lot of energy which is used to load) - so you may see my idea, why the preloader could be problematic.

the very empty battery could also be a bit of dirt or what do i know, doesn't have to be the firmware in my opinion..
personally, i hope it loads till 100% and works as usual then. i will keep my update and maybe downgrade the preloader only.

someone else expirienced this?

edit 2: ok, it was definently hardware.. what a torture i had now, i opened the phone a few times, but the first time at all..

usb-connector was flickering, i had to bend the inside of bv6000's connector a bit with small zip-ties.

camera-connector was not pressed after opening, so i downgraded and made a factory-reset to test if this is firmware - nope. opening once more was the solution.

so far, the firmware looks ok then. sorry for the misleading intepretations i've wrote.

ps: very nice and structured inside, blackview. everything is accessible and nice to disassembly for fixing, compliment, this is very cool!

Will this update be distributed by OTA?
Can not update using a computer