Blackview User Forum

[FEATURE REQUEST] Intercom App Additions

Post Reply
 
CallMeColt
Topic Author
Posts: 70
Joined: Mon Jan 14, 2019 6:25 pm

[FEATURE REQUEST] Intercom App Additions

Tue Jan 15, 2019 5:05 am

Hello,
   I purchased the phone to use the UHF radio built in but it is lacking some features that would be nice to have & add functionality to the phone.

   One would be to add the ability for "tones" when editing a channel. This is used for repeaters. I have been unable to get a repeater to work on the app due to this.

   The other would be to add a digital Morse Code ability. Set it up so you can type a message & tap send, then it sends out as a Morse Code. Then, have a setting to translate the Morse code when it is received. This would be extremely helpful in man situations.
Top
 
User avatar
blackview_admin
Posts: 8943
Joined: Mon Aug 17, 2015 3:30 am
Contact:
Contact blackview_admin

Re: [FEATURE REQUEST] Intercom App Additions

Tue Jan 15, 2019 11:41 pm

Will forward that to the tech team ;)
Top
 
bpz1970
Posts: 28
Joined: Wed Jan 16, 2019 8:56 pm

Re: [FEATURE REQUEST] Intercom App Additions

Wed Jan 16, 2019 9:06 pm

Hello. The option for editing tones is present actually. When editing an analog channel, in the part where you see RecvsubAudio you must select CTCSS instead of the Wave option (the same applies for SendsubAudio). Once you have the CTCSS option selected then you will be able to select your desired subtones.
I'm attaching a chart of subtone frequencies.
Good luck!
Top
 
CallMeColt
Topic Author
Posts: 70
Joined: Mon Jan 14, 2019 6:25 pm

Re: [FEATURE REQUEST] Intercom App Additions

Thu Jan 17, 2019 8:20 pm

bpz1970 wrote:
Hello. The option for editing tones is present actually. When editing an analog channel, in the part where you see RecvsubAudio you must select CTCSS instead of the Wave option (the same applies for SendsubAudio). Once you have the CTCSS option selected then you will be able to select your desired subtones.
I'm attaching a chart of subtone frequencies.
Good luck!


Okay, great! I did see that it had that option but the numbers made no sense. With this chart, it does now. Thanks!!
Top
 
stenfo777
Posts: 6
Joined: Thu Jan 24, 2019 12:43 pm

Re: [FEATURE REQUEST] Intercom App Additions

Mon Jan 28, 2019 3:43 pm

Hi, i bought this phone to use the intercom connected with my bluetooth paramotor helmet, but i can only use the headphones of the bluetooth headset and not the mic...will be nice if in the future would be implemented...
Top
 
Cilone
Posts: 44
Joined: Thu Dec 20, 2018 3:57 pm

Re: [FEATURE REQUEST] Intercom App Additions

Mon Jan 28, 2019 5:31 pm

I was looking forward this chart! Thank you!
Top
 
Helpless
Posts: 4
Joined: Fri Jan 25, 2019 5:55 pm

Re: [FEATURE REQUEST] Intercom App Additions

Thu Jan 31, 2019 8:26 pm

That list is not correct.....
Use the link below and use the 50 new Yaesu codes.


http://www.repeater-builder.com/tech-in ... chart.html
Top
 
Andrew ZS2AFB
Posts: 2
Joined: Fri Jan 25, 2019 7:16 pm

Re: [FEATURE REQUEST] Intercom App Additions

Sat Feb 02, 2019 5:15 am

Just a suggestion is to display the Tone Freq. (Hz) "88.5Hz"  In stead of the numbers then it will be very clear as to which tone code is being used ;)
Top
 
CallMeColt
Topic Author
Posts: 70
Joined: Mon Jan 14, 2019 6:25 pm

Re: [FEATURE REQUEST] Intercom App Additions

Sat Feb 02, 2019 1:06 pm

Helpless wrote:
That list is not correct.....
Use the link below and use the 50 new Yaesu codes.


http://www.repeater-builder.com/tech-in ... chart.html


Great list, thank you.
Top
 
CallMeColt
Topic Author
Posts: 70
Joined: Mon Jan 14, 2019 6:25 pm

Re: [FEATURE REQUEST] Intercom App Additions

Fri Feb 08, 2019 2:19 am

Andrew ZS2AFB wrote:
Just a suggestion is to display the Tone Freq. (Hz) "88.5Hz"  In stead of the numbers then it will be very clear as to which tone code is being used ;)

Yes, this would make it much easier.
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest