Page 1 of 2
[Answered] flash tutorial?
Posted: Fri Feb 09, 2018 12:59 am
by 97gérard216
Hello Admin,
News of Blackview
"The only shortage may be the 5.7 HD+ 720*1440 screen resolution, but now, we upgrading BV9000 Pro screen from HD to FHD, support display resolutions up to 1080*2160, offered to the user more perfect experience."
This upgrade is good news. However,The OTA update for BV9000Pro_FHD_blackview_VO.6_20180104, does not work. BV9000 Pro says "Your device is up to date".
Can I use the BV6000 tutorial to flash the BV9000 Pro ROM?
Re: [Answered] BV6000 tutorial?
Posted: Mon Feb 12, 2018 2:44 pm
by blackview_admin
Yes, that should work. Maybe you have to lower the connection speed in the flash tool (I had to do so on my test device).
Re: [Answered] flash tutorial?
Posted: Mon Feb 12, 2018 3:33 pm
by 97gérard216
hello,
by blackview_admin » Mon Feb 12, 2018 10:44 am
Yes, that should work. Maybe you have to lower the connection speed in the flash tool (I had to do so on my test device).
SP_Flash_Tool_v5.1728_Win or SP_Flash_Tool_V5.1744_Win
Option: connection, UART, Baud rate: 115200 then: 19200, then 9600
Message:
Smart Phone flash tool:
ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003)
Re: [Answered] flash tutorial?
Posted: Tue Feb 13, 2018 1:54 pm
by bonx49
TRY to connect with vol- key pressed ... and tell us if it's working !!!
Re: [Answered] flash tutorial?
Posted: Tue Feb 13, 2018 4:53 pm
by 97gérard216
bonx49 » Tue Feb 13, 2018 1:54 pm
TRY to connect with vol- key pressed ... and tell us if it's working !!!
Vol (-) key pressed, doesn't work, always the same message with either SP_Flash_Tool_v5.1728_Win or SP_Flash_Tool_V5.1744_Win
Option: connection, UART, Baud rate: 115200, Baud rate: 19200, Baud rate:9600
Message posted:
ERREUR: STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003)
Re: [Answered] flash tutorial?
Posted: Sat Feb 17, 2018 5:40 pm
by shokr
So if used this rom my BV9000 pro will be FHD ???
Re: [Answered] flash tutorial?
Posted: Sat Feb 17, 2018 5:54 pm
by 97gérard216
Nouvelles de Blackview :
http://www.blackview.hk/blackview-263/« La seule pénurie peut être le 5.7 HD + 720 * 1440 résolution d'écran, mais maintenant, nous la mise à niveau BV9000 écran Pro de HD à FHD, résolutions d'affichage de soutien jusqu'à 1080 * 2160, offert à l'utilisateur une exrience plus parfaite. »
In principle yes, based on Blackview news
Re: [Answered] flash tutorial?
Posted: Sun Feb 18, 2018 5:47 am
by shokr
It could also be that the new Bv9000 pro to be sold have different screen. Did you install the new rom
Re: [Answered] flash tutorial?
Posted: Sun Feb 18, 2018 5:49 am
by shokr
Hello
Admin may i asky you please if the software will make exciting Bv9000 pro FHD or this is a completely new devices with different screen from factory ?
Re: [Answered] flash tutorial?
Posted: Mon Feb 19, 2018 2:23 pm
by blackview_admin
shokr wrote:Hello
Admin may i asky you please if the software will make exciting Bv9000 pro FHD or this is a completely new devices with different screen from factory ?
I don't know this but I will post an answer when I receive one.