I own a BV8000pro for a few days now and am quite satisfied, even if small errors occur. Bluetooth I have to turn on separately when the phone was off. It does not start alone for my watch.
The notification LED lights permanently without cause. Sometimes in green, sometimes in red. Only a reboot fixes this.
But I can not update OTA. Mine version is V0.1_20170803_20170906-1035. Which would be the next and how can I get them?

I had to downgrade to 20170829 to get the 20171011 OTA.

Netsplitz wrote:

I had to downgrade to 20170829 to get the 20171011 OTA.

How can I do that?

If you want to get the latest update, you could download firmware from here
viewtopic.php?f=192&t=213272

Download SP Flashtool from here
viewtopic.php?f=192&t=319505

Follow instructions from link above.

On the other hand, if you're not experiencing any problems, I would suggest you don't upgrade and wait for the next (local) upgrade. Flashing rom could risk turning your phone into a brick if you don't follow the instructions exactly.

In any case, good luck!

is there any chance to get the OTA 20171011 as a download for local update? I am on 20170803

I haven't tried it, but you should be able download 20170822 for local flash, and it will download 20171011 via OTA.

viewtopic.php?f=192&t=213272

Good luck!

Tried it but didn´t work. Still don´t find a OTA update.

Don Harry wrote:

Tried it but didn´t work. Still don´t find a OTA update.

I had the same too, when I received the phone. I had to download the whole package to install via SP Flash Tool, and that's the only way I managed to install the latest firmware from November 1st.

@ADMIN
pls offer the last OTA version as a download for local update. Would be the easiest way.

2ADMIN
I too request you to get the latest firmware as local for flashtool.