Tested to flash my phone to 20171227 version. (20171227_s21v57c2k_jk_tee)
Everything according to "flashing-8000pro_v3.pdf" OK except actual flashing step 8.
After pressing "START ALL" and connecting phone to Cable again while pressing vol up button. Nothing happens... No sound from PC and No progress bar

Larsn wrote:

Tested to flash my phone to 20171227 version. (20171227_s21v57c2k_jk_tee)
Everything according to "flashing-8000pro_v3.pdf" OK except actual flashing step 8.
After pressing "START ALL" and connecting phone to Cable again while pressing vol up button. Nothing happens... No sound from PC and No progress bar

Have you ever flashed your device before?

Apart from flashing, does your phone get recognized when plugged into your PC?
If not, it confirms what paychi already stated: the battery charge issue also compromised the USB communication, making you unable to flash.
As i said before, an OTA update or a working local update will come to solve this issue.

blackview_admin wrote:

Larsn wrote:

Tested to flash my phone to 20171227 version. (20171227_s21v57c2k_jk_tee)
Everything according to "flashing-8000pro_v3.pdf" OK except actual flashing step 8.
After pressing "START ALL" and connecting phone to Cable again while pressing vol up button. Nothing happens... No sound from PC and No progress bar

Have you ever flashed your device before?

Apart from flashing, does your phone get recognized when plugged into your PC?
If not, it confirms what paychi already stated: the battery charge issue also compromised the USB communication, making you unable to flash.
As i said before, an OTA update or a working local update will come to solve this issue.

I hope that the local update will be working again soon, I have 18% battery left
As a last solution, battery could be charged externally after phone disassembly,
but I will rather solve this problem some other way..

paychi wrote:

blackview_admin wrote:

Larsn wrote:

Tested to flash my phone to 20171227 version. (20171227_s21v57c2k_jk_tee)
Everything according to "flashing-8000pro_v3.pdf" OK except actual flashing step 8.
After pressing "START ALL" and connecting phone to Cable again while pressing vol up button. Nothing happens... No sound from PC and No progress bar

Have you ever flashed your device before?

Apart from flashing, does your phone get recognized when plugged into your PC?
If not, it confirms what paychi already stated: the battery charge issue also compromised the USB communication, making you unable to flash.
As i said before, an OTA update or a working local update will come to solve this issue.

I hope that the local update will be working again soon, I have 18% battery left
As a last solution, battery could be charged externally after phone disassembly,
but I will rather solve this problem some other way..

I definitely agree with you!

If an ota update to solve this problem will be available remember that it can't be performed if battery is less than 30% with the actual limit! and some users may not be able to downgrade or upgrade. Maybe the team can set a lower limit.
Everything can be done, even flashing the rom without the battery, or as you said disassemble the phone and charge the battery externally, but most of users are not able. A small patch should be released only to address this problem, but I understand that this is not simple at all.

ghost82 wrote:

If an ota update to solve this problem will be available remember that it can't be performed if battery is less than 30% with the actual limit! and some users may not be able to downgrade or upgrade. Maybe the team can set a lower limit.
Everything can be done, even flashing the rom without the battery, or as you said disassemble the phone and charge the battery externally, but most of users are not able. A small patch should be released only to address this problem, but I understand that this is not simple at all.

for sure i'm not able to disassemble the phone and charge battery externally.

my battery is actually 9 % charged

a patch would be really appreciated...

My phone was delivered to a technician, who dismounted and charged the battery externally.
Now I'm waiting for a solution while the phone stays off.

Sbielak wrote:

My phone was delivered to a technician, who dismounted and charged the battery externally.
Now I'm waiting for a solution while the phone stays off.

Nice move! A solution should come soon!

blackview_admin wrote:

Nice move! A solution should come soon!

Actually this is good news.
I see that a lot of people is impacted by this charge problem, fortunately for me, with the original cable, I can always charge my phone.
Impatient to test this new update.

To update the smartphone local route needs a minimum of 30 % of battery. It is trying and I have lost 2 % of battery. Nowadays I am in 13 %. It of updating route flash is very complicated for a user without knowledge of computer science. Yesterday I visited two technical personnel and the two dissuaded this system to me since if it is not done well I can damage seriously my smartphone, besides the fact that it would put in danger the guarantee.
Yesterday I visited two technical personnel and the two dissuaded this system to me since if it is not done well I can damage seriously my smartphone, besides the fact that it would put in danger the guarantee. My smartphone is in guarantee, I believe that the best solution of blackview a today would be that they were returning the smartphones for new others, they should put in touch with us. The situation seems to me to be incredible. We go already near one week .... I have had to buy a new smarphone yesterday, have lost a lot of information and for something that I am not the person in charge.

Already it is not a question of calmness, I feel impotent and infuriated!