So let's summarize... the reason for the reboots could be: Everything. Thread can be closed.

Hola
Tengo versión 20170814 con root SuperSu. Esta configuración es perfectamente estable. No tengo ningún problema con mi BV8000. Para eliminar el sonido y vídeo de reset lo que hice fue eliminar esos ficheros en system... Pero es necesario root.
Estoy muy satisfecho con mi móvil, y no quiero hacer update. Con xposed y Gravity tengo todo lo que quiero.
---
I have version 20170814 with SuperSu root. This configuration is perfectly stable. I have no problem with my BV8000. To delete the sound and video of reset what I did was eliminate those files in system ... But you need root.
I am very satisfied with my mobile, and I do not want to update. With xposed and Gravity I have everything I want.

Mike! wrote:

So let's summarize... the reason for the reboots could be: Everything. Thread can be closed.

The issue is charging board based, but feeds of software things

MikeyGMT wrote:

Thanks Chris, Mino's doc was most helpful. I did at least get to install the drivers without the Certificate issue, but then I get code 10 in device manager, cannot start the device. I've read up on code 10 and it talks about re-installing all sorts of usb bits and bobs - I'm not fancying breaking my windows machine... I think I will patiently wait for the lovely Blackview folks to push out the next OTA update ASAP.

I am glad that my tutorial is helpful if it shows you code 10 it's okay... it is not a problem

blackview_admin wrote:

Hi guys!

I got an official changelog and flash files for the 20180124 update.
It has been released to fix/mitigate the reboot issue, so please flash it, perform a factory reset and report back

Hi admin,
I updated the software a month ago and I do not have a reboot.
Now i have the version 12/27 and i have no problems with reboot. (1 Month= no reboot) and battery drain is OK...
Thanks for your support.

khaqanson wrote:

blackview_admin wrote:

MikeyGMT wrote:

Thanks Chris, Mino's doc was most helpful. I did at least get to install the drivers without the Certificate issue, but then I get code 10 in device manager, cannot start the device. I've read up on code 10 and it talks about re-installing all sorts of usb bits and bobs - I'm not fancying breaking my windows machine... I think I will patiently wait for the lovely Blackview folks to push out the next OTA update ASAP.

i'd like to keep this thread on topic, but i want to say that getting the "code 10 error" in device manager after istalling the Mediatek drivers is normal: everything will work as it should, don't worry

Now let's get back to the topic

Well ,everyone is getting code-10 error i think as there is no hardware and we are only installing the drivers,I also got the same code-10 error and it had no issue with flashing new ROM.
So you need not to worry,Just check when you switch off your phone and plug it with your Pc ,Does you windows gives a sound of device connection or not?

Yes you are right "khaqanson" code 10 is not a problem.
It's okay not to be afraid. You can normally proceed with the flashlight

Yes you are right "khaqanson" code 10 is not a problem.
It's okay not to be afraid. You can normally proceed with the flashlight

I dont know how many times we have to write the same thing to make people understand.one should read the whole thread to find the solution of one's problem.

Its our moral duty to help each other, I will be very pleased if I could help anyone.

khaqanson wrote:

Its our moral duty to help each other, I will be very pleased if I could help anyone.

...and we apreciate it!

blackview_admin wrote:

Hi guys!

I got an official changelog and flash files for the 20180124 update.
It has been released to fix/mitigate the reboot issue, so please flash it, perform a factory reset and report back

So far so good on my end!