BJSr wrote:Hi. You may also use an app called Ampere. It will show you how much power that actually goes to the battery. At fast charge it should read up to 2130mA , on the BV 8000 Pro. Hope this helps.
Yeah, but stock android already shows if your device is fast charging or not

Ampere app is not mandatory.
rkolev wrote:Admin, can you please elaborate a little bit more on the fast charging. What are the conditions at which it is enabled ?
I am currently using the charger and USB cable that came with the phone, the battery is at 38% and when connected to the charger and on the lock screen the phone displays only "charging". Is there any option somewhere I should enable for "fast charging" ?
BJSr, as discussed in this thread:
viewtopic.php?f=191&t=364176the phone is not able to work with Ampere.
Fast charging is enabled by default, if the usb charger (together with a good usb cable) supports that.
Your device will start fast charging from a battery charge of 20-25% to 95%.
Just plug your device in, lock it,
wait few seconds, open the lock screen by pressing any button once (but don't unlock your phone!) and a text showing "Fast charge" or something similar will appear if your battery is in the range between 25% and 95%.
Idaho wrote:I can't find a mediatek pump express charger. All the chargers I have are Qualcom quick chargers.
You can buy another Blackview original charger, or chargers wich support the Mediatek Pump express feature like these:
https://www.aliexpress.com/wholesale?ca ... mp+expressOr you can buy another charger like the
Sony Quick Charger UCH12, wich also supports the Mediatek Pump express feature.
