bbs.blackview.com

Below is the flashing manual for BV7000Pro, before you start flashing, please make sure you have known clearly about this operation and you can do it.

Thanks for this manual, now we only need the Android 7 /7.1 file

After 3 weeks owning the BV7000pro. Is it possible to reflash a DEAD phone? It got to 35% battery and shit itself...
Any help from Blackview would be helpful.................

What pisses me off the most, is this phone has so much potential....It was a great phone, for3 weeks

Heo Quay wrote:

What pisses me off the most, is this phone has so much potential....It was a great phone, for3 weeks

yes you can use sp flash tool when the phone is off to reflash a rom onto your device as it connects using the vcom drivers, which are constantly running

Heo Quay wrote:

After 3 weeks owning the BV7000pro. Is it possible to reflash a DEAD phone? It got to 35% battery and shit itself...
Any help from Blackview would be helpful.................

Yes, you can use the same tutorial for a bricked phone or for solving other problems.

I follow the tutorial step by step , but after 10 minute I have BROMERROR in SP Flash All is fine, include VCOM drivers. Maybe this error is possible to appear because the phone is encrypted(Android system)? Or before start flashing is good to make a factory reset?

geotex wrote:

I follow the tutorial step by step , but after 10 minute I have BROMERROR in SP Flash All is fine, include VCOM drivers. Maybe this error is possible to appear because the phone is encrypted(Android system)? Or before start flashing is good to make a factory reset?

For normal you need no factory reset before flashing and also encrypted phones was no problem in my test. Was this your error message?

Message: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)
Meaning: The files you're trying to flash do not belong to or are not compatible with the phone you're trying to flash them to
Solution: Ensure you're using the correct files. If you're sure they are, then try formatting before flashing again. (By Formating you may loose your IMEI. It can be complicated to restore it by SN write tool.)

The message is BROM ERROR: STATUS_DEVICE_CTRL_EXCEPTION(0xC0050001)

And the file is from this forum - BV7000_PRO_Blackview_20170523-