I hvae Flash my BV6000 and now is not Startet.
Please give me a tipp

Cancel wrote:

I hvae Flash my BV6000 and now is not Startet.
Please give me a tipp

Hi,

The phone can not power on ? How do you flash it , any step or operation is ok?

Best regards,
Admin

Same for me, it is more or less dead, I flashed in finally successful, everything seemed OK, but it does not start anymore!
When i connect it again to the flash tools nothing happend, only sometimes when I press VOL + & VOL - and hte power button flashtools shows DA 100% in a second, but nothing more happend.
Any ideas?

I am able when I press VOL + to get it recognized in the flash tools, but except the "DOWNLOAD DA 100%" nothing happens, after a while I receive a brom error STATUS_RAM_EXCEPTION.
I guess I need a service? Where is it in HK? Or can i fix it somehow?

Greetings! Faced with a similar problem. I solved this problem very simple! It is necessary to disassemble the smartphone case and for a few seconds to disconnect the battery cable and connect it again !!! After that, your phone will boot in normal mode!

This is exactly the same error that I have.

By keeping the Vol-Up button pressed while you plug in the USB you activate the "Meta-Mode" which is kind of bypassing the regular download-mode. Its a kind of backdoor the Mediatek-Developers integrated in case of a bricked rom.
The Chipset is missing the original preloader, thats why its not getting recognised anymore.
I have exactly the same problem and the same error message every time, no matter which Flash Tool version or which computer I use.

Please let me know if there is any chance of bringing the phone back to life!

Hey , got the exact same problem.... OTA update to 7.0 failed and ended in a boot loop, tried to flash the official firmware version via sp flash tool on linux, tool finished successfully..... bv6000 wont boot anymore, no factory / recovery mode possible...no reaction from the phone at all....

found a workaround for me.... maybe it works for you as well......
so i used sp flash tool v.5.1644 (linux) and the offical Blackview firmware 20160822-s12v55_jk_3m
removed battery once....

open flashtool and go to the FORMAT area
select Auto Format Flash.... EXEPT bootloader and press play
plugin your phone holding the Volume Up button
if successfull, plug off your phone
go to the flash tool DOWNLOAD area
load the scatter.txt from the original firmware i mentioned above
select only the PRELOADER.bin
select the DOWNLOAD ONLY option, press DOWNLOAD and plug in your phone holding the Volume up button
if finished plug off your phone
Select all files for download, download only, press download and plug in your phone holding the Volume up button again
wait till finished, plug off your phone and restart it......
hope it works for you as well !!!!

i am watching you, ihave the same problem....And Admin looks he is not intresting, great Phone, support is a mess.I get dissapointed.

any update on this issue? STATUS_RAM_EXCEPTION

I hab the same problem after flashing the original Android 6 Version.
Thats the way I solved it:
1. Starting SP-Flash Tool again and use the same scatter file as before but uncheck everything.
2. Load a OTA flash file from this board and unzip it.
3. Check preloader and in the right box of it click right and select the preloader file from the OTA flash file.






4. Hold Power and Vol up button and connect cable it should now load the preloader
5. Disconnect the phone and power up.