bbs.blackview.com

I'm looking for tools for the BV6000.

I've worked out that the side star tool is a T5 Torx screwdriver.

What about the hexagonal screws on the back of the phone? What size are they and where can I get the tool from?
Thanks

Where? Allot come with a new screen and they aren't even complete. The back hex screws are not star screws so different tools are required. In addition, tools such as these https://www.aliexpress.com/item/Original-New-Blackview-BV6000-Phone-Disassemble-Tools-Kit-for-Blackview-BV6000S-Smartphone-4-7-inch-HD/32807820578.html?spm=2114.01010208.3.302.Pxol3T&ws_ab_test=searchweb0_0,searchweb201602_5_10152_10065_10151_10130_10068_436_10136_10157_10137_10060_10138_10131_10155_10062_10132_10156_10133_10154_10056_10055_10054_10059_10099_10103_10102_10096_10147_10052_10053_10050_10107_10142_10051_10084_10083_10119_10080_10082_10081_10110_10175_10111_10112_10113_10114_10037_10181_10183_10182_10185_10032_10078_10079_10077_10073_10070_10123_10120-10119,searchweb201603_2,ppcSwitch_2&btsid=4e608951-48b3-4913-8a39-764f2773fd9d&algo_expid=78b95b28-c1ac-44c0-8dec-92f5aa4e876e-42&algo_pvid=78b95b28-c1ac-44c0-8dec-92f5aa4e876e are not for taking the phone apart or even the back off. They are for removing the rubber plug flaps and the cover for the sim card.

I have seen several posts on this forum from people who have taken the battery out so someone must know which tools are needed?

The screws on the back side are common hexagonal sockets (allen key) 1,5 mm

Torx screw T5 & T6 for BV6000 see this link:
https://www.aliexpress.com/item/26-in-1 ... fe09440460

Thanks all. I can confirm that the back is a 1.5 mm allen key.

As for the kit you have shown me above, it's funny but I just bought this last night. Obviously I made the right choice. Cheers.