Hi, i have some question about bv6000 device, i hope you can help me...
1)How to disable the camera shutter sound? (i want only silence the camera click sound, not all notification)
2)The proximity sensor calibration failed at 2 step, i tried all way but nothing.
3)The compass calibrate failed too.

Hi,

For your first question, you can try to slove it via the camera setting.

And for the next 2 questions , more details need you to provide. please provide
some pictures or video help us to know the problem better.


Best regards,
Admin

Hi thank you for answer me, on firmware BV6000_Blackview_V01_20160608:
1) in camera settings there is nothing about sound
2)The proximity sensor calibration screen:
Step 1 ok

step2 failed, i tried in an empty room following all the step

When i try to start immediately give me error


3)Here the compass screen:
The compass is locked in this way, if i turn around 360°is always east

If i want to calibrate, the screen loop in this (i do what the video says but nothing happen



A few more things, have the device notification led? Can i get root permission?

I have the same problem with Compass. Imposible to calibrate. I bought my bv6000 just 2 days ago. Can you help me?

Trane wrote:

Hi thank you for answer me, on firmware BV6000_Blackview_V01_20160608:
1) in camera settings there is nothing about sound
2)The proximity sensor calibration screen:
Step 1 ok

step2 failed, i tried in an empty room following all the step

When i try to start immediately give me error


3)Here the compass screen:
The compass is locked in this way, if i turn around 360°is always east

If i want to calibrate, the screen loop in this (i do what the video says but nothing happen



A few more things, have the device notification led? Can i get root permission?

The error reminders told you that you need to place the object in front of the distance sensor , but you try it in a empty room , so
it told you the object is too far from distance sensor. It may be a wrong operation , so many reviewer test this , can work fine.

Best regards,
Amin

yaakov wrote:

I have the same problem with Compass. Imposible to calibrate. I bought my bv6000 just 2 days ago. Can you help me?

Hi,

You mean the compass fails to calibrate ?

Best regards,
Admin

Totally agree for the proximity sensor.

But the compass works fine in my BV6000... before my fail.

Hello All,

I have tested the compass with Z-Device Test:
The wifi radio and the bluetooth radio are interfering with the magnetic sensor axisZ.
If you turn the wifi off, the main part of the interference has eliminated. The bluetooth interference is much lower than the wifi's.

Try to calibrate and use compass with wifi off!

Regards: Tamas

Hi
How do I how do I get onto the PS calibration screen?

Thanks

Stevenjack wrote:

Hi
How do I how do I get onto the PS calibration screen?

Thanks

1) settings > About phone > tab several times on "Biuld number until developer mode is activated > go back
2) settings > developer options > Proximity sensor calibration