No response when you hit the power button.
Plugging unto the charger doesn't response too.
Tutorial Step By Step Guide
Tools Needed
SP_Flash_Tool_exe_Windows_v5.1620
http://spflashtools.com/wp-content/uplo ... 20_Win.zip
SN_Write_Tool_v1.1604.00
http://snwritetool.com/wp-content/uploa ... 604.00.zip
Drivers Needed
http://mtkusballdriver.com/wp-content/u ... v1.0.1.zip
Install the Drivers. Without it you couldn't proceed.
ROM Needed
Download Rom. (You need to downgrade) More success on this version. I've tried with 7.0 and other versions too.
Don't matter if you came from any version. (When i first bought it came with Nougat 7.0 with a lot of problems)
https://mega.nz/#!nl0TmCJK!rB7UDnoTBH8FcmvDXfIvxLwxVVkGDagDUQGS96s8u5A
Mirror
https://goo.gl/32Kjuw
This is Android 6.0 20160822_s12v55_jk_3m
Now you need to format your phone.
Run SP Flash Tool
Load the Android Scatter File from the Rom you downloaded
FORMAT
Go to Format Tab
Auto Format Flash Tick
Format Whole Except Bootloader Tick
Take out Battery connector (YES You need to remove your back cover and unclip the battery connector with your fingernail)
https://www.youtube.com/watch?v=9yLEemeXFnY&t=88s
4:35 Mark shows he is removing the battery connector
*THIS PROCESS WILL WIPE YOUR IMEI!!! ONLY PROCEED IF YOUR DEVICE IS DEAD & IMEI CORRUPTED*
With the battery connector still out.
Click the START on the SP Flash Tool and plug in your phone to the usb port while pressing Volume + Button.
Keep holding the Volume + Button till the SP Flash tool OK prompt.
Unplug Device
PRELOADER
Select Download Tab
Select Download Only Option
Untick ALL files below
Tick only PRELOADER
Now Hit the Download Green Icon
With Battery Connector Unplugged, Hold Volume + and plug in your phone to the usb port.
OK comes up.
Unplug the phone from the USB Port.
Wait till it prompt OK.
The Chipset is missing the original preloader, "That's why it is not getting recognized anymore."
Don't be alarmed just proceed to the next Step.
Flashing the whole ROM
On the Download Selection
Now tick everything
Selection should be DOWNLOAD ONLY
Now hit the Download Button
Press Volume + and plug the device to the Usb Port.
OK comes up.
Unplug your phone from the USB PORT.
Plug in your Battery Connector. BLACK VIEW Boot screen comes up. ALL GOOD NOW but soon you will realize you have no IMEI
Restoring IMEI GUIDE.
Run SN WRITER
Option TICK
Security USB
Composite Device
Comport: USB VCOM
Target Type Smart Phone
System Config
Only tick IMEI
Dual Imei
Data Base File (This is included in your ROM directory)
MD1_DB MDDB_InfoCustomAppSrcP_MT6755_S00_MOLY_LR11_W1539_MD_MP_V10
AP_DB APDB_MT6755_S01_alps-mp-m0.mp7_W16.04
These files are located at your ROM directory
Hit Save
Hit Start and insert your IMEI and press Ok
IMEI Random Sample
While the phone battery is unplugged from the connector press Volume - and plug to your Usb port.
Connect the battery connector while you continue to press Volume - and wait for the handshake until you get a PASS from the SN Writer. Do this till you get a PASS
Plug in your battery connector and boot up your phone.
Congratulations you just revived your DEAD PHONE and now with working IMEI.
Now it is time to install TWRP & Root.
Download TWRP https://goo.gl/7cSBbs for BV6000.
Download SuperSU 2.79 https://download.chainfire.eu/1021/Supe ... eve_file=1
Transfer the SuperSU file into your phone internal sd.
Go to Flashtool again.
Go to Download Tab
Click only Recovery
Change Directory of your Recovery File
Right Click your Recovery Location and choose the TWRP File you just downloaded.
Click Download
Now Unplug your battery connection and plug in your phone to the USB Port with Volume + Pressed.
Wait until it prompt OK.
Unplug the Usb from the computer.
Plug in your battery. Hold Power + Volume Up Release the Only Power button when you see BlackView Bootlogo. You will now boot into TWRP Mode.
Now use your OTG Cable supplied with your phone and plug in any Computer Mouse because you're unable to click or swipe any options.
YOU NEED A MOUSE TO NAVIGATE
Install your SuperSU file and root.
Congratulations you have successfully installed TWRP and your phone is now Rooted.
I hope i help a lot of people here as i myself spend almost 3 days trying to fix my phone. I followed an outdated tutorial, used wrong android scatter file that wasn't made for my ROM. Corrupted everything on my phone including NVRAM. There is no way i could recover anything. Luckily for MEDIATEK phones we could all fix that and have a good sleep.
