Omega pro firmware flash manual

blackview_admin
Posts: 3127
Joined: Mon Aug 17, 2015 3:30 am
Contact:

Omega pro firmware flash manual

Postby blackview_admin » Mon Feb 22, 2016 9:36 am

Dear customers ,

There is a Firmware flashing manual for Blackview Omega Pro on Windows 10 64-bit, Hope you will like it !

What you need for flash:
PC with installed Windows 10 64-bit
USB VCOM driver:
https://drive.google.com/file/d/0B6chOQ ... 25GMjRGTlk
Firmware itself. It is a folder with a set of files (MT67xx_Android_scatter.txt, system.img, recovery.img, boot.img …..)
https://drive.google.com/file/d/0B6chOQ ... XF4c2NZTlU
Software for flashing - SP Flash Tool https://drive.google.com/file/d/0B6chOQ ... XhNRjFOb3c

Stage №1 - Temporarily disable Driver Signature Verification:
1)
图片1.png

1. Press Windows Start menu button. Click “Restart” from the power options menu or the Start menu and hold down the “Shift” key at the same time.
2. When the computer starts up click Troubleshoot
2)
图片2.png

3. Then click Advanced Options
3)
图片3.png

4. From the next menu select Startup Settings
4)
图片4.png

5. Then press Restart
5)
图片5.png

6. The screen displayed allows you to “Disable driver signature enforcement” by pressing key F7
6)
图片6.png

Wait for the computer load the desktop and thats all. Driver Signature Verification is disabled for this Windows boot.


Stage №2 - Installing USB VCOM driver
1. Download the drivers and unzip it.
2. Open the Device Manager on your PC (My Computer -> Properties -> Device Manager). Then turn off the smartphone.
7)
图片7.png

3. Connect to a computer USB cable off the smartphone and immediately close look at the Device Manager. Once there appears a new connected device called MT65xx Preloader, do a right click on the device and choose to update the driver, and then search for the driver on the computer, then the “Browse my computer for driver software” button and specify the path where we unpacked our driver (extracted from the archive folder where the .inf files - All MTK USB Driver 2014\All MTK Drivers\New inst. win 7&8x64)
8)
图片8.png

9)
图片9.png

4. Click Install this driver software anyway and the installation will continue.
10)
图片10.png

11)
图片11-1.png

5. After installing the driver, it is desirable to restart the PC. If the driver installation was successful now when you connect your smartphone for a short while in the Device Manager in the section COM and LPT ports the device USB VCOM will appear.
12)
图片12.png


Stage №3 process of installing the firmware through SP Flash Tool:
1. Turn off the smartphone and disconnect it from the computer.
2. Download the firmware for your device and extract it to a folder. Go to the folder with the firmware files and remove Checksum.ini file. This is needed to prevent the errors during the flashing firmware.
3. Download the software SP Flash Tool, unzip it and go to the extracted folder. From the unpacked folder, locate the file Flash_tool.exe and run it (preferably run as administrator: Right-click on file -> Run as administrator)
13)
图片13.png

4.In the opened window, click the Scatter-loading (on the right side of the application). File explorer window appears, go to the folder with the unpacked firmware and select the file MT6735M_Android_Scatter.txt :
14)
图片14.png

5. After selecting the desired Scatter-file the program will load all the data about the firmware and its components in the form of a table. Make sure that the Flash Tool automatically checked all the files for the firmware:
15)
图片15.png

6. If all files are checked just click the Download button in the Flash Tool and the tool is in Standby mode. Flash Tool waiting for cable connection.
16)
图片16.png

7. Turn off the smartphone. Connect your phone to a computer via a USB cable, and in a couple of seconds (if the driver has been installed properly) Flash Tool will start the firmware flashing process.
17)
图片17.png

8. Wait until the process of firmware downloading will end (small window with a check mark in a green circle in the middle will appear). Then disconnect the phone from the computer.
18)
图片18.png


Hope this manual can help you to successfully flash your Omega pro !

Best regards,
Admin

folan
Posts: 22
Joined: Fri Jan 22, 2016 3:45 pm

Re: Omega pro firmware flash manual

Postby folan » Mon Feb 22, 2016 9:37 pm

what is the interest of this tutuorial?

Joost
Posts: 5
Joined: Mon Mar 20, 2017 8:05 pm

Re: Omega pro firmware flash manual

Postby Joost » Thu Mar 23, 2017 3:28 pm

do you also have this tutorial for a device that will not start after applying a small update of 69 MB?

Shan2563
Posts: 1
Joined: Mon Jul 10, 2017 10:50 am

Re: Omega pro firmware flash manual

Postby Shan2563 » Tue Jul 11, 2017 8:33 am

After this firmware, the phone stopped working at all !!! What it is necessary to make that it zhotja would submit signs of a life? Stitched in accordance with the instructions! This firmware is not suitable! Is there another?


Return to “Service and tech”

Who is online

Users browsing this forum: No registered users and 2 guests