Blackview User Forum

 
blackview_admin
Topic Author
Posts: 4944
Joined: Mon Aug 17, 2015 3:30 am
Contact:

BV6000 Firmware Flash Manual

Wed Aug 03, 2016 7:57 am

Dear BV6000 users,

The fresh BV6000 flash manual is done, here publishing it and hoping it can help you !

Please know before flashing
This is Firmware flashing manual on Windows 10 64bit :)

What we need to flash:
PC with installed Windows 10 64-bit
USB VCOM driver:
https://drive.google.com/file/d/0B6chOQ ... 25GMjRGTlk
Firmware itself. It is a folder with a set of files (MT67xx_Android_scatter.txt, system.img, recovery.img, boot.img …..)
https://drive.google.com/open?id=0B6chO ... XVaelI3U2c
Software for flashing - SP Flash Tool
https://drive.google.com/open?id=0B6chO ... UFyT2t3UUE
Stage №1 - Temporarily disable Driver Signature Verification
图片1.png
图片1.png (120.61 KiB) Viewed 38215 times

1. Press Windows Start menu button. Click “Restart” from the power options menu or the Start menu and hold down the “Shift” key at the same time.
2. When the computer starts up click Troubleshoot
图片2.png
图片2.png (28.4 KiB) Viewed 38215 times

3. Then click Advanced Options
图片3.png
图片3.png (34.37 KiB) Viewed 38215 times

4. From the next menu select Startup Settings
图片4.png
图片4.png (41.52 KiB) Viewed 38215 times

5. Then press Restart
图片5.png
图片5.png (24.13 KiB) Viewed 38215 times

6. The screen displayed allows you to “Disable driver signature enforcement” by pressing key F7
图片6.png
图片6.png (78.52 KiB) Viewed 38215 times

Wait for the computer load the desktop and that`s all. Driver Signature Verification is disabled for this Windows boot.

Stage №2 - Installing USB VCOM driver
1. Download the drivers and unzip it.
2. Open the Device Manager on your PC (My Computer -> Properties -> Device Manager). Then turn off the smartphone.
图片7.png
图片7.png (108.08 KiB) Viewed 38215 times

3. Connect to a computer USB cable off the smartphone and immediately close look at the Device Manager. Once there appears a new connected device called MT65xx Preloader, do a right click on the device and choose to update the driver, and then search for the driver on the computer, then the “Browse my computer for driver software” button and specify the path where we unpacked our driver (extracted from the archive folder where the .inf files - All MTK USB Driver 2014\All MTK Drivers\New inst. win 7&8x64)
图片8.png
图片8.png (90.62 KiB) Viewed 38215 times

图片9.png
图片9.png (84.84 KiB) Viewed 38215 times

4. Click Install this driver software anyway and the installation will continue.
图片10.png
图片10.png (58.45 KiB) Viewed 38215 times

图片11.png
图片11.png (48.78 KiB) Viewed 38215 times

5. After installing the driver, it is desirable to restart the PC. If the driver installation was successful now when you connect your smartphone for a short while in the Device Manager in the section COM and LPT ports the device USB VCOM will appear.
图片19  _副本.png
图片19 _副本.png (50.91 KiB) Viewed 38006 times




Stage №3 process of installing the firmware through SP Flash Tool:
1. Turn off the smartphone and disconnect it from the computer.
2. Download the firmware for your device and extract it to a folder. Go to the folder with the firmware files and remove Checksum.ini file (if it is present in folder). This is needed to prevent the errors during the flashing firmware.
3. Download the software SP Flash Tool, unzip it and go to the extracted folder. From the unpacked folder, locate the file Flash_tool.exe and run it (preferably run as administrator: Right-click on file -> Run as administrator)
图片13.png
图片13.png (38.77 KiB) Viewed 38215 times

4.In the opened window, click the Scatter-loading (on the right side of the application). File explorer window appears, go to the folder with the unpacked firmware and select the file MT6755_Android_Scatter.txt :
图片14.png
图片14.png (71.72 KiB) Viewed 38215 times

5. After selecting the desired Scatter-file the program will load all the data about the firmware and its components in the form of a table. Make sure that the Flash Tool automatically checked all the files for the firmware:
图片15.png
图片15.png (112.67 KiB) Viewed 38215 times

6. If all files are checked just click the Download button in the Flash Tool and the tool is in Standby mode. Flash Tool waiting for cable connection.
图片16.png
图片16.png (118.78 KiB) Viewed 38215 times

7. Turn off the smartphone. Connect your phone to a computer via a USB cable, and in a couple of seconds (if the driver has been installed properly) Flash Tool will start the firmware flashing process.
图片17.png
图片17.png (120.74 KiB) Viewed 38215 times

8. Wait until the process of firmware downloading will end (small window with a check mark in a green circle in the middle will appear). Then disconnect the phone from the computer.
图片18.png
图片18.png (120.74 KiB) Viewed 38215 times

9. Now you can simply turn on your smartphone in normal mode. Remember that after flashing, the first load of the device may take a long time (from 1 to 5 minutes!), be patient.

That's all, any questions, let us know!
Attachments
图片12.png
图片12.png (50.91 KiB) Viewed 38215 times
 
UncreativeUserName
Posts: 1
Joined: Wed Aug 03, 2016 11:12 am

Re: BV6000 Firmware Flash Manual

Wed Aug 03, 2016 11:22 am

Thanks for the guide, blackview_admin! :)
Besides the method of disabling the driver signature enforcement, is there anything to do differently if i want to flash my BV6000 using Windows 7 64bit? Is there another Version of the USB VCOM driver or the SP Flash Tool i have to use?
 
dolu31
Posts: 4
Joined: Mon Aug 01, 2016 10:29 pm

Re: BV6000 Firmware Flash Manual

Wed Aug 03, 2016 11:48 am

Hi, i only have windows 7, how can i do to install the new OTA please ?
 
User avatar
Morpheus
Posts: 23
Joined: Wed Jun 01, 2016 4:45 pm
Location: Las Cruces, NM USA

Re: BV6000 Firmware Flash Manual

Wed Aug 03, 2016 8:09 pm

Beautiful. Thank you for this. :D :D 8-) Followed instructions and it worked 100% A O K.
 
blackview_admin
Topic Author
Posts: 4944
Joined: Mon Aug 17, 2015 3:30 am
Contact:

Re: BV6000 Firmware Flash Manual

Thu Aug 04, 2016 6:35 am

dolu31 wrote:
Hi, i only have windows 7, how can i do to install the new OTA please ?


Hi,

if you receive the OTA update notification , you can choose to get a OTA update, this rom is just for
people who need to flash a new rom.

Best regards,
Admin
 
thiagoinacio2010
Posts: 2
Joined: Thu Dec 22, 2016 2:15 am

Re: BV6000 Firmware Flash Manual

Thu Dec 22, 2016 2:18 am

Hello, I performed the procedure selecting Format all + Download.
Cell phone will not turn on now
I need help, please.
 
thiagoinacio2010
Posts: 2
Joined: Thu Dec 22, 2016 2:15 am

Re: BV6000 Firmware Flash Manual

Thu Dec 22, 2016 6:41 pm

Hi, I did the procedure.
Now my phone does not turn on and does not recognize on the pc.
Need help. Thanks
 
tysken
Posts: 40
Joined: Mon Jan 09, 2017 5:29 pm

Re: BV6000 Firmware Flash Manual

Mon Jan 09, 2017 7:47 pm

Hello,

now i did the update trough computer and it works all, the green ok at the end comes, but now i can´t turn on my Phone.No reaction.Battery was full loaded.

Admin, can you please help me?

Thanks and if you want contact me directly, my email is mathias@tysken.nu

Greetings Mathias
 
JoseBraña
Posts: 3
Joined: Tue Jan 10, 2017 3:59 pm

Re: BV6000 Firmware Flash Manual

Tue Jan 10, 2017 5:02 pm

Although I followed the instructions correctly and tried several times I can not properly install the VCOM USB driver, the Windows 10 device manager indicates the unknown device and MT65XX Preloader never appears. Anyway I try to install the driver but it seems that there is not installed correctly and windows does not detect the phone and when I use the SP Flash tool does not start the firmware download. There is probably some problem with the Windows setup, but I do not know what it can be ... the PC is almost new and I have not made any major changes.
 
tysken
Posts: 40
Joined: Mon Jan 09, 2017 5:29 pm

Re: BV6000 Firmware Flash Manual

Tue Jan 10, 2017 6:05 pm

Dear Blackview team,

i´ve done it and now it wont start, no reaction of the Phone.I did exactly what you wrote(all driver worked, the config.ini deleted, all worked.What did go wrong?

regards Mathias

Who is online

Users browsing this forum: No registered users and 2 guests