Tutorial for the whole process of flashing ROM

User avatar
admin
Site Admin
Posts: 156
Joined: Fri Aug 14, 2015 10:06 am

Tutorial for the whole process of flashing ROM

Postby admin » Thu Sep 10, 2015 10:33 am

For some new users don't know how to flash ROM, This tutorial shows the whole process.
At first you need download the files to a new folder and remember the location then install

Download address: https://mega.nz/#F!S90AiTjD!sdVsi6JDiytWNRntFXr7qw

stagbeetle
Posts: 7
Joined: Fri Sep 25, 2015 11:07 am

Re: Tutorial for the whole process of flashing ROM

Postby stagbeetle » Fri Sep 25, 2015 12:14 pm

Hi, After a couple of hours I'm not having any luck with this. The camera is just not recognised - perhaps a Win 8.1 64 issue? On the camera I get 'USB connecting...' and on Win I get 'USB is not recognised' despite installing the driver in legacy mode without signature. I am using a black usb cable with 7 marks on the thin end (which I'm guessing matches the requirement for a "7P USB cable").

Is there a bin file I can load on the SD card instead?

Thanks,

User avatar
admin
Site Admin
Posts: 156
Joined: Fri Aug 14, 2015 10:06 am

Re: Tutorial for the whole process of flashing ROM

Postby admin » Mon Sep 28, 2015 1:57 am

did you mean the camera can not take photo or other?
then i can as our engineer to help you.

stagbeetle
Posts: 7
Joined: Fri Sep 25, 2015 11:07 am

Re: Tutorial for the whole process of flashing ROM

Postby stagbeetle » Mon Sep 28, 2015 12:00 pm

No, I'm trying to update the firmware but I'd rather use a bin file on an SD card than troubleshoot a USB connection.

stagbeetle
Posts: 7
Joined: Fri Sep 25, 2015 11:07 am

Re: Tutorial for the whole process of flashing ROM

Postby stagbeetle » Mon Sep 28, 2015 12:04 pm

(not sure if my previous reply was rejected)

I'm trying to update the firmware but the USB connection is not working.

Rather than struggle with the USB connection I'd prefer a firmware bin file that I can load onto the SD card.

Thanks,

User avatar
admin
Site Admin
Posts: 156
Joined: Fri Aug 14, 2015 10:06 am

Re: Tutorial for the whole process of flashing ROM

Postby admin » Tue Sep 29, 2015 3:23 am

The camera can use SD card to flash

stagbeetle
Posts: 7
Joined: Fri Sep 25, 2015 11:07 am

Re: Tutorial for the whole process of flashing ROM

Postby stagbeetle » Tue Sep 29, 2015 6:41 am

OK but the ZIP file only has an ELF. Where can I download the BIN file to flash?

stagbeetle
Posts: 7
Joined: Fri Sep 25, 2015 11:07 am

Re: Tutorial for the whole process of flashing ROM

Postby stagbeetle » Wed Sep 30, 2015 11:43 am

Hi, Any chance of getting a binary firmware update?


Return to “Users sharing”

Who is online

Users browsing this forum: No registered users and 1 guest