Instead of those pads I would use sanitary silicone. For a better fit, I would put some into a syringe, remove the metal needle from the plastic hose (i mean the plastic hose that is attached by glue to the metal part of the needle), optionally drill a slightly larger hole in the hose and push the s...

I wondered if the non pro would run the pro ROM without issue. Good! And I assume you didn't discover it actually had the radio bits, just disabled in the non pro ROM? I would wonder if it actually would cost enough to include the one or two chips necessary that they would have them deliberately le...

This is where you should start https://github.com/phhusson/treble_experimentations/releases I did not test nfc, wireless charging. Camera works with Open Camera(did not test the native camera app), gps works, extra buttons work with xposed edge (i made ptt to toggle flashlight on double tap and take...

Actually, if there is a problem with bv9500 pro (aside of walkie-talkie function) there is the same problem with bv9500. One has 2gb ram and 64 gb space more than the other(and the walkie-talkie). And depending of the system update you're on, different codes to access some hidden menus. Few months a...

Most probably I'll let this for another time; maybe I'll order replacement cables if I'll find them on aliexpress. About custom ROMs: don't know if two-way works because mine is bv9500 (no walkie-talkie inside). I had installed a ressurection remix based on oreo, a gsi based on oreo, a gsi based on ...

Well, it's not showing any reading. Factory reset? It was freshly flashed with original ROM and then updated via ota to the March update. Actually, when doing the antenna I had a gsi ROM installed on the phone (either oreo or pie - both worked good except for the proximity sensor, which is a known b...

Hello Admin, hello everybody I have a problem with the pressure sensor on my bv9500. I've opened the phone for lte antenna replacement. I am very veeeery happy now with the signal strength. Unfortunately the pressure sensor is not working anymore. I would like to address this issue but i need a phot...

While the tech team is investigating let me tell you this: I've just removed the LTE Rx antenna (in the upper-right corner as you look at the phone) and replaced it with 11cm of thin, insulated copper wire. And guess what? no more connectivity issues. I think the phones were not tested in a remote ...

Any news on this topic? Maybe the Rx lte antenna is too small/defective? Tech team is still investigating ;) While the tech team is investigating let me tell you this: I've just removed the LTE Rx antenna (in the upper-right corner as you look at the phone) and replaced it with 11cm of thin, insula...

Any news on this topic? Maybe the Rx lte antenna is too small/defective?